|
Connects between a Sigtronics' headset and your portable hand-held radio and allows two-way radio communications via the headset. The adapter consists of a belt clip box, which contains a radio push-to talk switch, a standard headset jack, and a portable radio interface cable. To use, simply unplug your headset from the emergency vehicle and plug it directly into the Portable Radio Adapter. Please call for the model number of the adapter that is compatible with your portable radio.
WARRANTY: One year parts and labor.
|
Click Photo for Close-Up
|
|
|
Makes it possible for pump panel operators or rescue personnel to move away from the vehicle while continuing to operate the mobile radio and maintain intercom communications (if applicable). Can be used with Sigtronics' emergency headsets and intercom systems or with the Mobile Radio Interface Module (MRIM-2).
 Includes a standard headset jack and a push-to-talk switch mounted on a belt clip box with your choice of coiled cords.
Model No.900106 extends to 15 feet
Model No. 900107 extends to 30 feet
WARRANTY: Two years parts and labor.
|
|
|
|
These high-quality adapters are used to connect Sigtronics' emergency intercoms and MRIM-2's to your mobile radio. No modifications are required! Simply plug the hand mic into the adapter, plug the adapter into the radio's mic connector, and connect the other side of the adapter to your Sigtronics intercom or MRIM-2. Your existing radio hand mic will still function as normal.
|
|
|
|
The Emergency Radio Switcher allows AM / FM radio to be heard whenever intercom and / or mobile radio communications are not occurring.
AM / FM radio will not be heard over mobile radio, it will automatically be muted when communications occur.
The Radio Switcher is great for monitoring traffic and weather reports.
WARRANTY: Two years parts and labor.
|
|
|
|
Instantly records information from dispatch to be played back later, which helps to reduce radio traffic.
Both sides of radio and intercom conversations can be recorded.
Recorder is non-volatile: will not erase message with loss of power.
Messages erase only when recorded over.
|
|
|
|
When collector rings are not available at aerial turntable for intercom system wiring, our Ring Bypass Cable will provide connection from apparatus body to turntable, bypassing collector rings.
It will allow for a jack and push-to-talk switch at the turntable and a jack at the ladder tip.
|
|
|
|
This genuine Sigtronics engineered and built adapter is used to safely control the power to your Sigtronics systems in vehicles with 24vdc or positive ground electrical systems.
For use with Ultrasound, EAI, and S-A-F-E intercoms, Digital Voice Recorder, and Emergency Radio Switcher.
|
|
